Skip to main content
NetApp Knowledge Base

The System Manager reports "Storage failover is disabled"

  1. Last updated
  2. Save as PDF
Views:
795
Visibility:
Public
Votes:
3
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • System Manager

Issue

The System Manager reports "Storage failover is disabled"
 
Run the storage failover command to determine the state:
 
NetApp01::> storage failover show -instance
 
Node: NetApp01-01
Partner Name: NetApp01-02
Node NVRAM ID: 538225768
Partner NVRAM ID: 538226498
Takeover Enabled: false
HA Mode: ha
Takeover Possible: false
Reason Takeover not Possible: Storage failover is disabled
Interconnect Up: true
Interconnect Links: RDMA Interconnect is up (Link up)
Interconnect Type: GOP (PLX PEX8725 NTB)
State Description: Connected to NetApp01-02, Takeover is not possible: Storage failover is disabled
Partner State: Up
Time Until Takeover: -
Reason Takeover not Possible by Partner: Storage failover is disabled
Auto Giveback Enabled: true
Takeover Detection Time (secs): 15
Takeover on Panic Enabled: true
Takeover on Reboot Enabled: true
Delay Before Auto Giveback (secs): 600
Press <space> to page down, <return> for next line, or 'q' to quit... q
 
 
Node:NetApp01-02
Partner Name:NetApp01-01
Node NVRAM ID: 538226498
Partner NVRAM ID: 538225768
Takeover Enabled: false
HA Mode: ha
Takeover Possible: false
Reason Takeover not Possible: Storage failover is disabled
Interconnect Up: true
Interconnect Links: RDMA Interconnect is up (Link up)
Interconnect Type: GOP (PLX PEX8725 NTB)
State Description: Connected to NetApp01-01, Takeover is not possible: Storage failover is disabled 2, Takeover is not possible: Storage failover is disabled
Partner State: Up
Time Until Takeover: -
Reason Takeover not Possible by Partner: Storage failover is disabled
Auto Giveback Enabled: true
Takeover Detection Time (secs): 15
Takeover on Panic Enabled: true
Takeover on Reboot Enabled: true
Delay Before Auto Giveback (secs): 600
Press <space> to page down, <return> for next line, or 'q' to quit... q

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.