How are FlexGroup Inodes calculated after increasing the limits?
Applies to
ONTAP 9.2
ONTAP 9.3
ONTAP 9.1
Description
The inode count limits are given per constituent volume as shown in table 9 (page 45) from the NetApp FlexGroup Volume Best Practices and Implementation Guide
This table details the default inode counts based on each constituent volume size
The table shows that for volume size greater than 1TB the default inode count limit for each volume is 21,251,126 inodes
To obtain the current inode count the command df -i can be run from the nodeshell of each node in the cluster