Skip to main content
NetApp Response to Russia-Ukraine Cyber Threat
In response to the recent rise in cyber threat due to the Russian-Ukraine crisis, NetApp is actively monitoring the global security intelligence and updating our cybersecurity measures. We follow U.S. Federal Government guidance and remain on high alert. Customers are encouraged to monitor the Cybersecurity and Infrastructure Security (CISA) website for new information as it develops and remain on high alert.
NetApp Knowledge Base

SensorReadingFailed alert on H410S

Views:
539
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

Applies to

  • NetApp Element Software
  • NetApp H410S (H300S, H500S, H700S)

Issue

The following errors could appear in SolidFire ActiveIQ:

  • Error checking sensor for Inlet Temp (10193x)
  • Error checking sensor for FanX RPM (10193x)

At the same time, when running ipmitool from the Management Node (mNode), the output of various Temp sensors shows a Fail Status (rather than the expected OK): 

  •  sudo ipmitool -I lanplus -H <node-BMC-IP-address> -U <BMC-username> -P <BMC-password> sdr

sfadmin@NODE /usr/bin $ sudo ./smc-ipmicfg -sdr
Status | (#)Sensor                |      Reading | Low Limit | High Limit |
------ | ---------                |      ------- | --------- | ---------- |
  Fail | (4) CPU1 Temp            |          N/A |       N/A |   98C/208F |
  Fail | (71) CPU2 Temp           |          N/A |       N/A |   98C/208F |
  Fail | (138) PCH Temp           |          N/A |    5C/41F |   95C/203F |
  Fail | (205) System Temp        |          N/A |   -5C/23F |   85C/185F |
  ---omitted---

 

 

Scan to view the article on your device
CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support