Skip to main content
NetApp Knowledge Base

H610S - BMC Self Test failed

Views:
2,141
Visibility:
Public
Votes:
0
Category:
h-series
Specialty:
solidfire
Last Updated:

Applies to

NetApp H610S

Issue

  • Persistent cluster fault:

BMC Self Test failed. This may impact IPMI based services and a BIOS/BMC update may be recommended.

  • Along with the "BMC Self Test failed" cluster fault, any or all of the following conditions may also be present:
    • BMC web GUI is inaccessible
    • Node Offline events:
      • The SolidFire Application cannot communicate with node ID <#>
      • Node Offline nodeID=<#>
    • Cannot ping or SSH to the BMC IP address
    • Persistent cluster faults related to fans, power supplies, and system sensors.  Examples:
    • Fan1A RPM is failed or missing.
    • Error checking sensor for Fan1B RPM
    • Error checking sensor for Inlet Temp
    • Error checking sensor for Exhaust Temp
    • ipmitool commands fail with errors such as:
    • Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory
    • Get SEL Info command failed: Invalid command
    • Error sending Chassis Status command: Invalid command
    • Get Channel Info command failed: Invalid command

 

 

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support