Skip to main content
NetApp Knowledge Base

Unable to use an IP address from a subnet - Subnet does not have address available

  1. Last updated
  2. Save as PDF
Views:
1,758
Visibility:
Public
Votes:
2
Category:
ontap-9
Specialty:
core
Last Updated:

​ ​

Applies to

ONTAP 9

Issue

  • Attempt to add a new LIF using a specific IP from a predefined Subnet in OnCommand System Manager (OCSM) fails with error:  

Data ONTAP API Failed: Subnet "Subnet_name" in IPspace "IPSpace_name" does not have address "x.x.x.x" available. (Error 13001)

  • Same error is shown when an attempt is made to create the LIF from the CLI:

Error: Command failed: Subnet "Subnet_name" in IPspace "IPSpace_name" does not have address "x.x.x.x" available.

  • No IP addresses in the subnet are available despite only few being actually in use.
  • The "missing" IPs are not found anywhere on the cluster:
  • ​​​​​​10 IP addresses are reported in use:

::> network subnet show -ipspace Default -subnet-name Demo -instance
                     IPspace Name: Default
                      Subnet Name: Demo
                 Broadcast Domain: Default
                   Layer 3 Subnet: 10.20.30.0/24
                          Gateway: 10.20.30.1
IP Addresses or IP Address Ranges: 10.20.30.41-10.20.30.50
              Total Address Count: 10
               Used Address Count: 10            
          Available Address Count: 0

  • Only 2 IP addresses are in use by LIFs - 8 are "missing":

::> network interface show -vserver * -lif * -ipspace * -address 10.20.30.*

                Logical   Status     Network            Current       Current Is
Vserver       Interface   Admin/Oper Address/Mask       Node          Port    Home
-----------  ----------   ---------- ------------------ ------------- ------- ----
svm1
            svm1_cifs_nfs_lif1
                          up/up      10.20.30.41/24      cluster1-01   a0a-10  true
            svm1_cifs_nfs_lif2
                          up/up      10.20.30.42/24      cluster1-01   a0a-10  true

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.