Skip to main content
NetApp Knowledge Base

Inode nearly full alert threshold is set to 80

  1. Last updated
  2. Save as PDF
Views:
407
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • SnapMirror Type-XDP Volume

Issue

Receiving this alert every 60 minutes:
 
Basic Problem Description :
Risk          - Inodes Nearly Full
Impact Area   - Protection
Severity      - Warning
State         - New
Source        - 
Cluster Name  - 
Cluster FQDN  - 
Trigger Condition - The nearly full threshold set at 80% is breached. 24.39 million (81.93%) of 29.77 million are used. 
 
  • SnapMirror Type-XDP destination volumes will increase their inode count when the SnapMirror source volume used value is  greater than 90% of the destination volume's max inode count​​.
  • Inode Nearly Full alerts at 80% are unnecessary if the inode value is automatically increased after 90% full.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.