Skip to main content

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

NetApp Knowledge Base

What conditions can cause write-back caching disabled on E-series?

Last Updated:

Applies to

E series


This problem can occur for the following reasons:
  • Battery Failure
  • Battery below minimum capacity
  • The cache size memory of the controllers is different
  • Cache Reconfiguration
  • A Cache Data-Restore operation is in progress, which interrupted the normal write-back caching process
  • The space in the cache backup device is insufficient for storing the cache
  • Memory parity error
  • Simplex configuration - cache cannot be mirrored
  • controller reboot/failure/upgrade
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device