Skip to main content
NetApp Knowledge Base

NON_PREFERRED_PATH due to host port failure

Views:
99
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

Applies to

E-series

Issue

  • Recovery guru reports NON_PREFERRED_PATH-Recovery Failure.
  • ionShow reports one path is down.

-> tditnall 0
...TDITN..:...................................Initiator.....................................:..........IOs..........:........Busy.........Idle
tditn Ch : Location Device Name Port Name Seq : Open Completed Errs : Ms Ms
------ -- :--------- -------------------------------- -------------------------------- ---- :----- ---------- ----- :------------ ------------
1 0 : Am 5d039ea1eaxxxxxx 5d039ea1ea886004 0 : 0 21884 0 : 17172809 0
2 1 : Am 5d039ea1eaxxxxxx 5d039ea1ea886000 0 : 0 21820 0 : 17172809 0
3 99 : Intrnl IOSHIP 0000000000000002 0 : 0 0 0 : 0 17172809
-< 4 2 :Host_0000 iqn.1998-01.com.vmware:5cxxxxxx- 0000000100000002 1 : 0 0 0 : 17172809 0

  • Link status of controller is Connected.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.