Skip to main content
NetApp Knowledge Base

E-series drive upgrade failed with “Failed - Invalid drive state”

Last Updated:

Applies to

SANtricity OS 11.70.1R1


Updating disk firmware to latest version fails with the following error:
0 successful, 0 failed-partial, 1 failed-invalid state, 0 failed-other, 0 not attempted, 0 recon-in-progress, 0 pending
Manufacturer Product ID Tray, Drawer, Slot Vol Group/Mode Type Proposed Firmware Transfer Progress ________________________________________________________________________________________________________
SEAGATE ST4000NM0023 99 4 4 Hot spare SAS MS04 Failed - Invalid drive state

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device