Skip to main content
NetApp Knowledge Base

DRAC is reporting a global system status of 5.0 on Dell_DRAC_SystemStatus, placing the device into error state

  1. Last updated
  2. Save as PDF
Views:
629
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

Applies to

  • NetApp SolidFire SF-Series nodes
  • Integrated Dell Remote Access Controller (iDRAC)

Issue

On iDRAC UI under Storage Overview > Physical Disks Overview
 
RAC0501: There are no physical disks to be displayed
1. Check if the host system is powered off or shutdown
2. Check if the physical disks are inserted into the enclosure or attached to the backplane
3. There are no out-of-band capable controllers detected
 
No further alerts are seen in NetApp SolidFire Active IQ and the node is running fine

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.