Skip to main content
NetApp Knowledge Base

Disk partitions are not automatically assigned during MetroCluster IP installation

  1. Last updated
  2. Save as PDF
Views:
707
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

Applies to

  • ONTAP 9
  • MetroCluster IP
  • Advanced Disk Partitioning (ADP)
  • Disk autoassignment enabled
  • AFF-A220

Issue

During the MetroCluster IP installation/configuration procedure, the data1 & data2 partitions remain unassigned.

Example:

cluster1::*> disk show -fields owner,data1-owner,data2-owner,root-owner
disk   owner           data1-owner   data2-owner   root-owner
------ --------------- ------------- ------------- ---------------
1.0.0  cluster1-node02 -             -             cluster1-node02
1.0.1  cluster1-node02 -             -             cluster1-node02
1.0.2  cluster1-node02 -             -             cluster1-node02
1.0.3  cluster1-node02 -             -             cluster1-node02
1.0.4  cluster1-node02 -             -             cluster1-node02
1.0.5  cluster1-node02 -             -             cluster1-node02
1.0.6  cluster1-node01 -             -             cluster1-node01
1.0.7  cluster1-node01 -             -             cluster1-node01
1.0.8  cluster1-node01 -             -             cluster1-node01
1.0.9  cluster1-node01 -             -             cluster1-node01
1.0.10 cluster1-node01 -             -             cluster1-node01
1.0.11 cluster1-node01 -             -             cluster1-node01
1.0.12 -               -             -             -
1.0.13 -               -             -             -
1.0.14 -               -             -             -
1.0.15 -               -             -             -
1.0.16 -               -             -             -
1.0.17 -               -             -             -
1.0.18 -               -             -             -
1.0.19 -               -             -             -
1.0.20 -               -             -             -
1.0.21 -               -             -             -
1.0.22 -               -             -             -
1.0.23 -               -             -             -
24 entries were displayed.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.