Luns not visible on the host end due to no proper zoning

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 4,975

Visibility:: Public

Votes:: 3

Category:: ontap-9

Specialty:: san

Last Updated:

Applies to

ONTAP 9.x
Hyper-v host
VMware ESXi
RHEL
Windows
FCP

Issue

Newly created LUNs are not visible on the host end.
Unable to reconnect to LUNs after fibre channel switch change
On the storage end, the luns could be seen online and mapped to the host
fcp ping-igroup show displays zone-info-not-available and or not-zoned

cs1::> vserver fcp ping-igroup show -node ncfasndxxx|ncfasndxxx Igroup Logical Node Ping Extended Vserver Name WWPN Interface Name Status Status --------- ----------- -------------- ---------- --------- -------- ----------- n_xxx nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_1_1 ncfasndxxx zone-info-not-available - nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_2_1 ncfasndxxx zone-info-not-available - nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_1_1 ncfasndxxx zone-info-not-available -

cs1::> vserver fcp ping-igroup show -node ncfasndxxx|ncfasndxxx Igroup Logical Node Ping Extended Vserver Name WWPN Interface Name Status Status --------- ----------- -------------- ---------- --------- -------- ----------- n_xxx nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_1_1 ncfasndxxx not-zoned - nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_2_1 ncfasndxxx not-zoned - nxx3 10:00:00:10:9b:a3:xx:xx ncfasndxxx_fc_lif_1_1 ncfasndxxx not-zoned -

Verify igroup show -v command output and the initiator login status.

ncfasclxxx::> igroup show nxx3-v Vserver Name: n_xxx Igroup Name: nxx3 Protocol: fcp OS Type: vmware Portset Binding Igroup: fc_pset_1 Igroup UUID: fc89xxx4-5xx7-1xxc-9xx5-00a098d6xxxx ALUA: true Initiators: 10:00:00:90:fa:aa:xx:xx (not logged in) 10:00:00:90:fa:aa:xx:xx (not logged in)