Skip to main content
NetApp Knowledge Base

How to move a port from one broadcast-domain to another broadcast-domain while LIFs are using the port within ONTAP 9

  1. Last updated
  2. Save as PDF
Views:
11,915
Visibility:
Public
Votes:
14
Category:
ontap-9
Specialty:
nas
Last Updated:

Applies to

ONTAP 9

Description

  • Within ONTAP 9 networking ports are organized within broadcast-domains. 
  • After a port is added to a broadcast domain you might wish to move that port to a different broadcast domain.
  • If the port is the home port for a LIF or currently hosting a LIF, attempting to remove the port from the broadcast domain will result in this error:

cluster1::> network port broadcast-domain remove-ports -broadcast-domain BD2 -ports cluster1-01:e0c

Error: command failed: Port "cluster1-01:e0c" cannot be used because it is currently the home port or current port of a LIF. To view LIFs with a specified home port, use the "network interface show -home-node <nodename> -home-port {<netport>|<ifgrp>}"command. To view LIFs with a specified current port, use the "network interface show -curr-node <nodename> -curr-port {<netport>|<ifgrp>}" command.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.