Skip to main content
NetApp Knowledge Base

Broadcast domain not reachable after switch disable the ports

  1. Last updated
  2. Save as PDF
Views:
396
Visibility:
Public
Votes:
1
Category:
ontap-9
Specialty:
core
Last Updated:

Applies to

  • ONTAP 9
  • Cisco NX5000 series

Issue

  • In EMS we see error that LACP is inactive and broadcast domain is not reachable

net.ifgrp.lacp.link.inactive:error:ifgrp a0b, port e0h has transitioned to an inactive state. The interface groupis in a degraded state.
 
[node-01: vifmgr: vifmgr.reach.noreach:notice]: Network port a0b-243 on node node-01 cannot reach its expected broadcast domain Default:data. No other broadcast domains appear to be reachable from this port.
 
  • On the switch side we see the following:

%ETHPORT-5-IF_DOWN_ERROR_DISABLED: Interface Ethernet106/1/8 is down (Error disabled. Reason:DCX-No ACK in 100 PDUs)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.