Cluster Deploy failed NodePoweredOnFailed on one or more nodes
Applies to
ONTAP Select Deploy
ESXi host
Issue
- New ONTAP Select Cluster and one or more nodes show they failed on Power on.
-
hostd.log reports:
2022-08-21T14:00:50.602Z verbose hostd[2110360] [Originator@6876 sub=Vigor.Vmsvc.vm:/vmfs/volumes/xxxxxxx-xxxxexx-/Cluster/node.vmx opID]
Power On message: This host supports Intel VT-x, but Intel VT-x is disabled.
--> Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting.
--> (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.'
--> (2) Power-cycle the host if either of these BIOS/firmware settings have been changed.
--> (3) Power-cycle the host if you have not done so since installing VMware ESX.
--> (4) Update the host's BIOS/firmware to the latest version.
--> This host does not support "Intel EPT" hardware assisted MMU virtualization.
--> VMware ESX does not support the user level monitor on this host.
--> Module 'MonitorMode' power on failed.
--> Failed to start the virtual machine.