Bridge unreachable in-band

Last updated

Feb 10, 2022
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 693

Visibility:: Public

Votes:: 0

Category:: metrocluster

Specialty:: metrocluster

Last Updated:: 2/10/2022, 12:12:23 PM

Applies to

ATTO 7500N FibreBridge
ATTO 7600N FibreBridge

Issue

The Bridge is unreachable in-band and is not responding to in-band commands:

mc1::> system health alert show
               Node: mc1-02
           Resource: ATTO_2000001086a83308

    Severity: Major
    Indication Time: Thu Aug 19 20:24:03 2021
           Suppress: false
        Acknowledge: false

Probable Cause: "ATTO_2000001086a83308" bridge is not reachable over management network.
Possible Effect: Bridge "ATTO_2000001086a83308" cannot be monitored for alerts.
 Corrective Actions: 1) If the bridge is monitored by SNMP, verify that the node management LIF is up
                     by using the "network interface show" command.
Verify that the "ATTO_2000001086a83308" bridge is alive by using the "network ping" command.

   2) If the bridge is monitored in-band, check the fabric cabling to the bridge, and then verify that the bridge is powered up.

mc1::> storage bridge run-cli -name ATTO_2000001086a83308 -command "info"
[Job 34738] Job succeeded: Bridge is currently unavailable. Wait a few minutes and then try the operation again.Copied