Skip to main content
NetApp Knowledge Base

Is upgrading EPLD firmware on Cisco Nexus 9336C-FX2 cluster switches required?

  1. Last updated
  2. Save as PDF
Views:
856
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
HW
Last Updated:

Applies to

  • Cisco Nexus 9336C-FX2 Ethernet Switch
  • Electronic programmable logic devices (EPLD)
  • Field-programmable gate arrays (FPGA)

Answer

  • Per Cisco documentation, updating the EPLD and FPGA firmware is not required, but it is highly recommended
  • NetApp switch documentation for ONTAP includes instructions to download and install the latest EPLD image as part of any NX-OS version upgrade
    • In this upgrade procedure, the switch is rebooted as part of the NX-OS and EPLD upgrade

Additional Information

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.