Unable to access new Brocade G610 switch
Applies to
Issue
- New G610 switch is booting in single user mode
- Login prompt is not shown when a Serial cable is connected to new switch instead its booting in single user mode as below
sh-4.3#
sh-4.3# bootenv
bootenv: No such file or directory
bootenv: Could not open boot environment.
sh-4.3#
- Power cycled the switch to see if switch is accessible, but issue still persists.
BootROM version: 3.0.4
Copyright (C) 2016 Brocade Communication.
CPU0: T1022E, Version: 1.1, (0x85290211)
Core: e5500, Version: 2.1, (0x80241021)
Single Source Clock Configuration
Clock Configuration:
[..]
Silkworm CPLD [board: 170, rev: 2:max 65536:]
Uboot wdt counter value: 0
arch: exit
/pcie@ffe240000: PCICSRBAR @ 0xff000000 paddr_hi 0xefffffff paddr_lo 0xe0000000 hose_offset 0xb20000000
Freescale FM module, FMD API version 21.1.0
Freescale FM Ports module
m41t11: I2C Real-Time-Clock detected on iic0 addr 0x68
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
INIT: version 2.88 booting
sh-4.3#