Skip to main content
NetApp Knowledge Base

How to verify that time synchronization has been successfully completed after configuring NTP on E-Series?

Views:
215
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:
7/25/2024, 1:42:42 AM

Applies to

E-Series

Answer

It can be checked by EVENT LOG:
  1. Open SANtricity Management Software (SANtricity® System Manager) -> Support -> EVENT LOG 
  2. Enter 'ntp' as a search keyword in the filter box then press Enter.
    1. Controller clocks set by NTP or SNTP Server event indicates that time synchronization has been successfully completed.

Screenshot 2024-07-25 101938.png

  1. The following two events indicate that time synchronization fails to get completed.
    1. The DNS/NTP configuration on this controller is either incorrect or all the NTP servers are unreachable over the network 
    2. Either the NTP server's resolved orconfigured IP address is wrong or the IP address is unavailable via theattached network

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.