Skip to main content
NetApp Knowledge Base

Can an Initiator iSCSI Alias be configured from the Netapp console?

  1. Last updated
  2. Save as PDF
Views:
42
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • OnTap 9.0 and above

Answer

An iSCSI initiator Alias cannot be configured from the storage perspective. The host iSCSI alias is an attribute configurable from the host side. For best practices on configuring the host iSCSI initiator Alias, you must refer to the specific host vendor best practices.

Additional Information

additionalInformation_text
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.