Skip to main content
NetApp Knowledge Base

Does SGF6112's BMC support SNMP v1 configuration?

  1. Last updated
  2. Save as PDF
Views:
91
Visibility:
Public
Votes:
0
Category:
storagegrid-webscale
Specialty:
esg
Last Updated:

Applies to

Answer

  • No, SGF6112's BMC doesn't  support SNMP v1 configuration.
  • SGF6112 's BMC only supports SNMP v3 and can be configured per BMC user as below:
  1. Click Settings > User Management from the menu bar:

Does SGF6112's BMC support SNMP v1 configuration

  1. Click on the user to add SNMP support for:

Does SGF6112's BMC support SNMP v1 configuration

  1. Then check the SNMP Access box:

Note: Optionally, select Enable Trap

Does SGF6112's BMC support SNMP v1 configuration

  1. Configure the SNMP v3 settings:

BMC support SNMP v1 configuration

  1. Test the configuration: 

SNMP v1 configuration

Additional Information

additionalInformation_text
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.