Skip to main content
NetApp Knowledge Base

Prefix length can not be saved when setting up VSC within IPv6 environment

  1. Last updated
  2. Save as PDF
Views:
166
Visibility:
Public
Votes:
0
Category:
virtual-storage-console-for-vmware-vsphere
Specialty:
VIRT
Last Updated:

Applies to

  • Virtual Storage Console (VSC) 9.6P1, 9.6P2 and 9.7
  • IPv6 environment

Issue

When changing the IPv6 prefix length in Virtual Storage Console's Network Configuration menu, the change isn't saved.  The following procedure does not work:
 
Example:
  1. Go to network configuration menu and select 2) Change IP address settings
  2. Change the prefix length from default value 128 to 64:
    • clipboard_eee104ae4d81138e00eb86dde721f03bc.png
  3. Save all the settings.
  4. Review the network configuration again.  The prefix length shows 128 instead of 64.

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.