Applies to This KB applies primarily to the HCI nodes types below: HCI Compute Nodes H300E/H500E/H700E (deprecated; now H410C) HCI Flash Storage Node Note, however, that the RTFI process also applies ...Applies to This KB applies primarily to the HCI nodes types below: HCI Compute Nodes H300E/H500E/H700E (deprecated; now H410C) HCI Flash Storage Node Note, however, that the RTFI process also applies to these non-HCI nodes running Element Software: SF Series Storage Nodes SF3010/SF6010/SF9010 (legacy, EOA) FC Series Fibre Channel Nodes HCI Deployment Engine/Monitoring Agent When performing a RTFI using a USB key, you received the error: No valid Solidfire image found
Applies to ONTAP 9 AFF A700, AFF A700s, AFF A300, AFF A200 and later models FAS9000, FAS8200, FAS2650, FAS2620 and later models Description Most AFF and FAS hardware models have one or more USB Type A...Applies to ONTAP 9 AFF A700, AFF A700s, AFF A300, AFF A200 and later models FAS9000, FAS8200, FAS2650, FAS2620 and later models Description Most AFF and FAS hardware models have one or more USB Type A ports. However, not all models support use of that port for external USB devices for use with activities such as boot_recovery or coredump saving. This support was added with AFF and FAS models introduced with ONTAP 9.1.
Applies to Cisco Nexus 3232C Cisco Nexus 3132Q-V Cisco Nexus 5596 Cisco Nexus 5596T Description This procedure is for loading switch firmware or RCF files onto a Cisco cluster switch from a removable ...Applies to Cisco Nexus 3232C Cisco Nexus 3132Q-V Cisco Nexus 5596 Cisco Nexus 5596T Description This procedure is for loading switch firmware or RCF files onto a Cisco cluster switch from a removable USB thumb drive. It eliminates the need for a TFTP or other webserver in environments where they are unavailable or it is not possible to use them.
Applies to AFF Models FAS Models ONTAP 9 Description At times, it might be necessary to update the BIOS outside of ONTAP. This procedure can be performed at the LOADER prompt. WARNING Only use this pr...Applies to AFF Models FAS Models ONTAP 9 Description At times, it might be necessary to update the BIOS outside of ONTAP. This procedure can be performed at the LOADER prompt. WARNING Only use this procedure when necessary. Normally, service image (BIOS) updates are performed with the instructions found at the NetApp Support System Firmware download page for each specific version.
