Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • https://kb.netapp.com/on-prem/ontap/mc/MC-KBs/What_do_the_MetroCluster_HealthMonitoring_alerts_mean
      This alert indicates that there is no InterSwitch Link (ISL) present between the Fibre Channel switches in between the sites of the MetroCluster. Indicates a link from the FC port of the bridge to the...This alert indicates that there is no InterSwitch Link (ISL) present between the Fibre Channel switches in between the sites of the MetroCluster. Indicates a link from the FC port of the bridge to the switch or controller is not working correctly This alert indicated that one or more of the MetroCluster Fibre Channel switches is no longer reachable via the Ethernet network. A power supply of the MetroCluster backend FibreChannel switch has a failed or a the power is interrupted
    • https://kb.netapp.com/Legacy/NetApp_HCI/OS/NetApp_Deployment_Engine_NDE_or_Scale_fails_to_discover_new_compute_and_storage_nodes
      Applies to NetApp Deployment Engine NetApp HCI EasyScale Issue NetApp Deployment Engine(NDE) fails to discover new compute and storage nodes.
    • https://kb.netapp.com/on-prem/ontap/mc/MC-KBs/METROCLUSTER_HEAL_ROOT_AGGR_FAILED_-_AutoSupport_Message
      Review the output of metrocluster operation show and follow the correction actions mentioned in the error section before trying the heal command again. Note: The metrocluster operation show output wil...Review the output of metrocluster operation show and follow the correction actions mentioned in the error section before trying the heal command again. Note: The metrocluster operation show output will only report on the last metrocluster operation. If a subsequent metrocluster operation has run since the root-aggregate healing failure the output will not be relevant to the failure. Run the metrocluster operation history show command with the identified operation uuid: