Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • https://kb.netapp.com/data-mgmt/SnapCenter/SC_KBs/Changed_MSSQL_host_log_directory_SnapCenter_still_saves_logs_in_old_path
      SnapCenter Plug-in for Microsoft SQL Server Host log directory (HLD) path has changed for Always-On Availability Group For one or more hosts SnapCenter continues saving logs to previously configured H...SnapCenter Plug-in for Microsoft SQL Server Host log directory (HLD) path has changed for Always-On Availability Group For one or more hosts SnapCenter continues saving logs to previously configured HLD path When trying to change HLD, SnapCenter logs show: ERROR SnapManagerWeb PID=[2868] TID=[89] ErrorCode (129), ErrorMessage (Failed to find host (sqlhost.example.com). Verify if the host is up and running and check the DNS and firewall settings. No such host is known.)
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Disk_redundancy_failed_for_disk_with_one_path_only_on_NVMe_shelf
      Device Port Negotiated Medium Device Port Negotiated Received Disk Port Max Link Max Link Link Max Link Max Lane Max Lane Lane Error Bad TLP Bad DLLP Uncorrectable Correctable Id State Speed Speed Spe...Device Port Negotiated Medium Device Port Negotiated Received Disk Port Max Link Max Link Link Max Link Max Lane Max Lane Lane Error Bad TLP Bad DLLP Uncorrectable Correctable Id State Speed Speed Speed Speed Width width width Count Count Count Errors Errors (GT/s) (GT/s) (GT/s) (GT/s) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ (...) [ 20] OK 8.0 8.0 8.0 8.0 4 2 2…
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/iSCSI_paths_lost_after_MetroCluster_decommission_procedure
      Applies to ONTAP 9.x Microsoft Windows Server Issue After performing offline MetroCluster node decommission, iSCSI hosts have only one active path to LUN Multipath is not establishing via SnapDrive
    • https://kb.netapp.com/on-prem/ontap/DP/SnapRestore/SnapRestore-KBs/How_to_define_single_file_path_for_SnapRestore
      Applies to ONTAP 9.x SnapRestore Snapshot Description The file path is a required for SnapRestore, this Article describes how to verify the path and filename