Applies to ONTAP Select vSAN VMware Issue When a high amount of writes occur (on datastore VMFS-6) which causes VMDK to grow, the operation hangs up and ONTAP is rebooted with the following panic mess...Applies to ONTAP Select vSAN VMware Issue When a high amount of writes occur (on datastore VMFS-6) which causes VMDK to grow, the operation hangs up and ONTAP is rebooted with the following panic message: WAFL hung for <volname>. in SK process wafl_exempt01 on release 9.x (C) Normally a core dump will be generated which can be uploaded to a new or existing NetApp case to match it to this particular issue.
Applies to E-Series controllers using 16Gb or 32Gb fibre channel host interfaces Controllers running firmware prior to 8.30.4X.XX, 11.30.4, 8.40.1X.XX, and 11.40.1 Brocade FC switch connected to contr...Applies to E-Series controllers using 16Gb or 32Gb fibre channel host interfaces Controllers running firmware prior to 8.30.4X.XX, 11.30.4, 8.40.1X.XX, and 11.40.1 Brocade FC switch connected to controllers In rare cases, a controller may reboot when connected to a Brocade switch and running a controller firmware version less than listed above. Controller may report the following in the exception log: Page Fault errCode: 0 pc: 0xffffffff83a2b87a (with the following contained in the backtrace)