Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • e0M Port on controller is permanently down
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/e0M_Port_on_controller_is_permanently_down
      Applies to FAS platforms AFF platforms Issue e0M port down Service Processor is accessible
    • Brocade CP blade not reachable via management port
      https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Brocade_CP_blade_not_reachable_via_management_port
      CP blade Management (MGMT) Ethernet port CP blade not reachable via Management (MGMT) Ethernet port Bond interface down and eth0 shows NO-CARRIER: RX: bytes packets errors dropped overrun mcast : eth0...CP blade Management (MGMT) Ethernet port CP blade not reachable via Management (MGMT) Ethernet port Bond interface down and eth0 shows NO-CARRIER: RX: bytes packets errors dropped overrun mcast : eth0: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 1500 qdisc mq master bond0 state DOWN qlen 1000 Supported link modes: 10baseT/Half 10baseT/Full Advertised link modes: 10baseT/Half 10baseT/Full drv probe link timer ifdown ifup rx_err tx_err tx_queued intr tx_done rx_status pktdata hw wol 0xffff8000
    • Service Processor is not functioning
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Service_Processor_is_not_functioning
      Applies to NetApp AFF and FAS systems ONTAP 9 Service Processor - SP Baseboard Management Controller - BMC Management port - e0M Issue Unable to connect to the service processor via SSH, firmware imag...Applies to NetApp AFF and FAS systems ONTAP 9 Service Processor - SP Baseboard Management Controller - BMC Management port - e0M Issue Unable to connect to the service processor via SSH, firmware image and version is seen as "unknown". Refer to the additional information section for more details.