Applies to NetApp Element software 8.0 and above NetApp H-series storage nodes NetApp SF-Series storage nodes Upgrade using sfinstall command Description NetApp SolidFire Active IQ and cluster UI repo...Applies to NetApp Element software 8.0 and above NetApp H-series storage nodes NetApp SF-Series storage nodes Upgrade using sfinstall command Description NetApp SolidFire Active IQ and cluster UI report an Upgrade in progress alert Normal drive and node removal API calls and GUI options are not accepted while cluster is in an upgrade process This article explains the recommended procedure for removing a failed storage node during an Element upgrade
This list contains all API calls you cannot make during an Element software upgrade. Warning: Caution should be taken when running APIs while a cluster is in 'Upgrade Mode'. If any of these APIs shoul...This list contains all API calls you cannot make during an Element software upgrade. Warning: Caution should be taken when running APIs while a cluster is in 'Upgrade Mode'. If any of these APIs should be run while upgrading, please contact NetApp Technical Support and reference this article for further assistance. API restrictions will continue to apply to any cluster containing Fibre Channel (FC) nodes, regardless of the Element software version