Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 6 results
    • Autosupport not sent when a disk is failed
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Autosupport_not_sent_when_a_disk_is_failed
      Per bug 791214, in extremely rare cases, a disk can fail in a way that makes the disk appear to be removed (instead of being marked failed) and then re-appearing afterwards, not triggering a failed di...Per bug 791214, in extremely rare cases, a disk can fail in a way that makes the disk appear to be removed (instead of being marked failed) and then re-appearing afterwards, not triggering a failed disk Autosupport.
    • Disk shows in broken pool even after replacement
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/Disk_shows_in_broken_pool_even_after_replacement
      Applies to Data ONTAP 8.2.1 Issue Command "sysconfig -r" displays the old failed disk even the disk has been replaced like below. Example: Broken disks RAID Disk Device HA SHELF BAY CHAN Pool Type RPM...Applies to Data ONTAP 8.2.1 Issue Command "sysconfig -r" displays the old failed disk even the disk has been replaced like below. Example: Broken disks RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --------- ------ ------------- ---- ---- ---- ----- -------------- -------------- failed 0a.02.14 0a 2 14 SA:A 0 SAS 15000 560000/1146880000 560208/1147307688
    • How to replace damaged vmdk in ONTAP Select HA
      https://kb.netapp.com/on-prem/ontap/ontap-select/Select-KBs/How_to_replace_damaged_vmdk_in_ONTAP_Select_HA
      Applies to NetApp ONTAP Select HA NetApp ONTAP Select Deploy 9.8 or higher VMware ESXi HW RAID SyncMirror Description This article provides steps to replace an ONTAP Select virtual disk in case of a b...Applies to NetApp ONTAP Select HA NetApp ONTAP Select Deploy 9.8 or higher VMware ESXi HW RAID SyncMirror Description This article provides steps to replace an ONTAP Select virtual disk in case of a backend problem.
    • Cloud Volumes ONTAP for AWS - Aggregate in failed state due to a failed disk
      https://kb.netapp.com/Cloud/Cloud_Volumes_ONTAP/Cloud_Volumes_ONTAP_for_AWS_-_Aggregate_in_failed_state_due_to_a_failed_disk
      Applies to Cloud Volumes ONTAP (CVO) for AWS Amazon Web Services (AWS) Amazon Elastic Block Store (Amazon EBS) Issue CVO reporting aggregate in failed state One disk within aggregate failed
    • How to determine a failed disk location based on disk id using HWU
      https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/How_to_determine_a_failed_disk_location_based_on_disk_id_using_HWU
      Applies to ONTAP 9 HWU Hardware Universe Disk Description This procedure describes how to determine the location of a failed disk based upon the disk id.
    • MetroCluster backend LUNs show as failed after E-Series issue
      https://kb.netapp.com/on-prem/E-Series/SANtricity-OS-KBs/MetroCluster_backend_LUNs_show_as_failed_after_E-Series_issue
      Applies to ONTAP 9 FAS/AFF Systems E-Series backend CFW 08.40.60.01 Issue After doing maintenance on the E-Series backend, and performing a staggered reboot of the E-Series controllers, a large number...Applies to ONTAP 9 FAS/AFF Systems E-Series backend CFW 08.40.60.01 Issue After doing maintenance on the E-Series backend, and performing a staggered reboot of the E-Series controllers, a large number of backend LUNs show as failed, and ONTAP sends the following alert: SYMPFA:System Notification from METROCLUSTER01-01 (SYNCMIRROR PLEX FAILED) ALERT