Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 4 results
    • https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/Why_do_nodes_report_SPARES_LOW_during_an_upgrade
      When there is one whole, unpartitioned SSD spare for Storage Pool assigned to only one node, you can receive this alert during takeover events as the takeover node replays the events for the node that...When there is one whole, unpartitioned SSD spare for Storage Pool assigned to only one node, you can receive this alert during takeover events as the takeover node replays the events for the node that is rebooting. However, if the Storage Pool provides allocation units only to hybrid aggregates that are owned by one of the nodes in the HA pair, then the SSD spare must be owned by that same node.
    • https://kb.netapp.com/data-mgmt/Digital-Advisor-KBs/AIQDA_Health_Check_shows_spares_low_alert_despite_no_callhome.spares.low_in_EMS
      The following alert appears in Capacity on Dashboard in AIQDA and disappears after a few days: Potential Impact: If there aren't enough spares, in the event of a failure, a reconstruct will not be kic...The following alert appears in Capacity on Dashboard in AIQDA and disappears after a few days: Potential Impact: If there aren't enough spares, in the event of a failure, a reconstruct will not be kicked off and redundancy will be affected. The same alert remains in Spares & Drives on Recommended Configuration on Health Check in AIQDA SYSCONFIG-R in AutoSupport for the target node of the alert shows that the node has only a root aggregate and a spare partition:
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/SPARES_LOW_messages_when_using_ADP
      EMS message error "node_name-01: config_thread: callhome.spares.low:error]: Call home for SPARES_LOW: /aggr1_data/plex0/rg1" in one or more RAID groups and/or nodes when using ADP.
    • https://kb.netapp.com/on-prem/ontap/OHW/OHW-KBs/SPARES_LOW_ERROR
      Applies to FAS2750 AFF A200 FAS8200 Internal shelf with ADPv1/v2 partitioned disks. External shelf with same internal disk models, but not partitioned. Issue AutoSupport message: Thu Apr 22 16:42:00 +...Applies to FAS2750 AFF A200 FAS8200 Internal shelf with ADPv1/v2 partitioned disks. External shelf with same internal disk models, but not partitioned. Issue AutoSupport message: Thu Apr 22 16:42:00 +0200 [node_name: config_thread: callhome.spares.low:error]: Call home for SPARES_LOW