Skip to main content
NetApp Knowledge Base

Search

  • Filter results by:
    • View attachments
    Searching in
    About 3 results
    • https://kb.netapp.com/Legacy/OnCommand_Suite/OnCommand_System_Manager_3.x_cannot_connect_to_7-mode_storage_via_TLS_with_RSA_key_length_of_2048
      Applies to OnCommand System Manager (OCSM) 3.x 7-mode ONTAP Java 8u65+ RSA key length >= 2048 Issue While attempting to connect to a 7-mode ONTAP storage system via HTTPS using OCSM, the following err...Applies to OnCommand System Manager (OCSM) 3.x 7-mode ONTAP Java 8u65+ RSA key length >= 2048 Issue While attempting to connect to a 7-mode ONTAP storage system via HTTPS using OCSM, the following error message is displayed: 500 Connection refused The storage system configuration has TLS and SSL enabled (both partners for Data ONTAP 7-Mode). The Java configuration has TLS 1.0, 1.1, and 1.2 enabled. The browser being used has TLS 1.0, 1.1, and 1.2 enabled.
    • https://kb.netapp.com/data-mgmt/SnapCenter/SC_KBs/Adding_a_Linux_Host_fails_with_The_key_length_should_be_greater_than_or_equal_to_2048_bits
      Applies to SnapCenter Plug-in for Linux (SCO/SCHANA/SCC) 4.2 and higher Issue When attempting to add a Host SnapCenter fails with: The fingerprint key length of 1024 bits is less than the minimum supp...Applies to SnapCenter Plug-in for Linux (SCO/SCHANA/SCC) 4.2 and higher Issue When attempting to add a Host SnapCenter fails with: The fingerprint key length of 1024 bits is less than the minimum supported key length of 2048 bits and is not secure. The key length should be greater than or equal to 2048 bits.
    • https://kb.netapp.com/on-prem/Switches/Brocade-KBs/How_to_modify_RSA_SSH_Hostkey_to_2048_bits_on_Brocade_Switch
      SSH Server Public Key Too Small