Search

Archive backup to secondary storage checkbox disabled for SnapManager & SnapMirror XDP integration
https://kb.netapp.com/Legacy/SnapManager/SnapManager_integration_set_up_with_SnapMirror_XDP_results_in_archive_backup_being_disabled
Applies to SME/SMSQL 7.1/7.2 or SMHV 2.X SnapDrive 7.0.3 or 7.1.x FlexPod SnapManager for HyperV SnapManager for Microsoft SQL Server Issue SMSQL and SnapMirror XDP integration: quick set up guide and...Applies to SME/SMSQL 7.1/7.2 or SMHV 2.X SnapDrive 7.0.3 or 7.1.x FlexPod SnapManager for HyperV SnapManager for Microsoft SQL Server Issue SMSQL and SnapMirror XDP integration: quick set up guide and possible reasons for SnapManager to show the 'Archive backup to Secondary Storage' check box as disabled.
How to configure VMware vSphere 5.x for Data ONTAP 7.3 and 8.x
https://kb.netapp.com/data-mgmt/OTV/VSC_Kbs/How_to_configure_VMware_vSphere_5.x_for_Data_ONTAP_7.3_and_8.x
Applies to ONTAP FlexPod Description This article provides the following information for configurations using VMware vSphere 5.x with Data ONTAP 7.3 and 8.x: The configuration parameters that meet the...Applies to ONTAP FlexPod Description This article provides the following information for configurations using VMware vSphere 5.x with Data ONTAP 7.3 and 8.x: The configuration parameters that meet the best practices guidelines. An example of how to set up a configuration using the best practices recommendations.
How to add a storage system running Data ONTAP in SCVMM 2012
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/How_to_add_a_storage_system_running_Data_ONTAP_in_SCVMM_2012
Applies to ONTAP 9 System Center Virtual Machine Manager (SCVMM) Description This article documents the procedure of adding a NetApp storage system running Data ONTAP to Microsoft System Center Virtua...Applies to ONTAP 9 System Center Virtual Machine Manager (SCVMM) Description This article documents the procedure of adding a NetApp storage system running Data ONTAP to Microsoft System Center Virtual Machine Manager (SCVMM) 2012.
Brocade Switch 5100 fan failure
https://kb.netapp.com/on-prem/Switches/Brocade-KBs/Brocade_Switch_5100_fan_failure
sensor 1: (Temperature ) is Ok, value is 23 C sensor 2: (Temperature ) is Ok, value is 9 C sensor 3: (Temperature ) is Ok, value is 17 C sensor 4: (Temperature ) is Ok, value is 11 C sensor 5: (Fan ) ...sensor 1: (Temperature ) is Ok, value is 23 C sensor 2: (Temperature ) is Ok, value is 9 C sensor 3: (Temperature ) is Ok, value is 17 C sensor 4: (Temperature ) is Ok, value is 11 C sensor 5: (Fan ) is Faulty sensor 6: (Fan ) is Faulty sensor 7: (Power Supply) is Ok sensor 8: (Power Supply) is Ok psshow: Power Supply #1 is OK Power Supply #2 is OK fanshow: Fan 1 is Faulty Fan 2 is Faulty
How to change the initiator group ostype attribute from default to the correct value
https://kb.netapp.com/hybrid/FlexPod/How_to_change_the_initiator_group_ostype_attribute_from_default_to_the_correct_value
Applies to Data ONTAP 7 and earlier FlexPod Description Initiator groups (igroups) have an ostype attribute of default. For example: > igroup show -v myigroup (FCP): OS Type: default Member: 10:20:00:...Applies to Data ONTAP 7 and earlier FlexPod Description Initiator groups (igroups) have an ostype attribute of default. For example: > igroup show -v myigroup (FCP): OS Type: default Member: 10:20:00:00:00:2e:00:00 (logged in on: 0b, 0a) The ostype attribute can be set to default only by the Manage Data ONTAP API. The API can either specify the ostype as default or cause default to be applied by the system by not setting the ostype during igroup creation.
Host-side SCSI Timeouts when using iSCSI
https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/Host-side_SCSI_Timeouts_when_using_iSCSI
Why is the storage system generating iSCSI LUN Reset/Target Warm Reset/New session messages? [iscsi.notice:notice]: ISCSI: iswta, LUN Reset (from initiator iqn.1991-05.com.microsoft:exch), aborting al...Why is the storage system generating iSCSI LUN Reset/Target Warm Reset/New session messages? [iscsi.notice:notice]: ISCSI: iswta, LUN Reset (from initiator iqn.1991-05.com.microsoft:exch), aborting all SCSI commands on lun 0 A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data contains the target name. The CDB is given in the dump data. Initiator sent a task management command to reset the target. The target name is given in the dump data.
How to set up the Qlogic Fibre Channel (FC) host bus adapter (HBA) for Boot from storage area network (SAN)
https://kb.netapp.com/on-prem/ontap/da/Host-Utilities/Host-Utilities-KBs/How_to_set_up_the_Qlogic_Fibre_Channel_FC_host_bus_adapter_HBA_for_Boot_from_storage_area_network_SAN
Applies to FlexPod Data ONTAP 7 and earlier Description This article describes the procedure to set up the Qlogic Fibre Channel (FC) host bus adapter (HBA) for Boot from storage area network (SAN)
VMware vSphere: The mount request was denied by the NFS server
https://kb.netapp.com/hybrid/FlexPod/VMware_vSphere_The_mount_request_was_denied_by_the_NFS_server
Applies to ONTAP VMware vSphere Issue When you attempt to create a NFS datastore, the operation fails with the error The mount request was denied by the NFS server. Example:
How to gather logs for the Virtual Storage Console (VSC) plugin 7.x / 9.x using the vSphere WebClient / HTML5 UI
https://kb.netapp.com/data-mgmt/OTV/VSC_Kbs/How_to_gather_logs_for_VSC_plugin
Applies to Virtual Storage Console (VMware) 7.x Virtual Storage Console (VMware) 9.x Description This article describes the procedure that should be followed to gather logs for the Virtual Storage Con...Applies to Virtual Storage Console (VMware) 7.x Virtual Storage Console (VMware) 9.x Description This article describes the procedure that should be followed to gather logs for the Virtual Storage Console (VSC) plugin. This procedure includes instructions for both the vSphere WebClient and vSphere HTML5 UI (user interface). Note: If the Virtual Storage Console interface is not visible,see the following KB on how to collect logs manually
When is in-order delivery (IOD) required and how is it set?
https://kb.netapp.com/on-prem/ontap/da/SAN/SAN-KBs/When_is_in_order_delivery_IOD_required_and_how_is_it_set
If one switch in the fabric delivers out-of-order exchanges, the exchanges are delivered to the target out-of-order, regardless of the policy configured on other switches in the fabric. Out of order d...If one switch in the fabric delivers out-of-order exchanges, the exchanges are delivered to the target out-of-order, regardless of the policy configured on other switches in the fabric. Out of order delivery in these environments should not occur if the switches are configured according to the “Switch Configuration for Fabric MetroCluster” which is posted on the NOW site.
How to report OneCollect or Config Advisor issues
https://kb.netapp.com/on-prem/ontap/Ontap_OS/OS-KBs/How_to_report_OneCollect_or_Config_Advisor_issues
Applies to OneCollect Config Advisor NetApp Community Description Procedure to report and work issues tools OneCollect or Config Advisor as they are not directly supported by NetApp Support.