Skip to main content
NetApp Knowledge Base

PING from PC to NetApp interfaces replies with (DUP!) entry

  1. Last updated
    Mar 30, 2023
  2. Save as PDF
Views:
318
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
7dot
Last Updated:
3/30/2023, 8:04:13 PM

Applies to

  • Data ONTAP 7-mode
  • ONTAP 9

Issue

  • When run PING command from client, its throwing "DUP!" in reply:
PING 1x.xx.10.xx (1x.xx.10.xx) 56(84) bytes of data.
64 bytes from 1x.xx.10.xx: icmp_seq=1 ttl=255 time=0.110 ms
64 bytes from 1x.xx.10.xx: icmp_seq=1 ttl=255 time=0.140 ms (DUP!) ------->
64 bytes from 1x.xx.10.xx: icmp_seq=2 ttl=255 time=0.135 ms
64 bytes from 1x.xx.10.xx: icmp_seq=2 ttl=255 time=0.160 ms (DUP!) ------->
64 bytes from 1x.xx.10.xx: icmp_seq=3 ttl=255 time=0.255 ms
64 bytes from 1x.xx.10.xx: icmp_seq=3 ttl=255 time=0.286 ms (DUP!) ------->
  • No duplicate ip error reported in NetApp ems logs.
    • EMS does NOT show netinet.ethr.duplct.ipAdrr

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.