Skip to main content
NetApp Knowledge Base

H615C reports alert Fan_SYSx_x Lower Critical - Going Low

Views:
18
Visibility:
Public
Votes:
0
Category:
netapp-hci
Specialty:
HW
Last Updated:

Applies to

  • NetApp HCI
  • NetApp H615C compute node

Issue

IPMI System Event Log (SEL):
 
[Critical]	[Fan_SYS6_1]	[Fan]	Lower Critical - Going Low (Reading: 0 RPM/ Threshold: 500 RPM) - Asserted
[Warning]	[Fan_SYS6_1]	[Fan]	Lower Non-Critical - Going Low (Reading: 0 RPM/ Threshold: 1000 RPM) - Asserted
[Critical]	[Fan_SYS6_0]	[Fan]	Lower Critical - Going Low (Reading: 0 RPM/ Threshold: 500 RPM) - Asserted
[Warning]	[Fan_SYS6_0]	[Fan]	Lower Non-Critical - Going Low (Reading: 0 RPM/ Threshold: 1000 RPM) - Asserted

BMC UI > Sensor 

clipboard_e854884c08aef9cdd71fb50499dff869e.png 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.