Skip to main content
NetApp Knowledge Base

NetApp H610S storage node power off and on procedure

  1. Last updated
  2. Save as PDF
Views:
4,290
Visibility:
Public
Votes:
3
Category:
h-series
Specialty:
hci
Last Updated:

Applies to

  • NetApp H610S storage nodes
  • mNode over 11.x

Description

This procedure applies to NetApp H610S storage nodes.
 
Turn the power off and on safely for NetApp H610S nodes during any scenario that requires a full power cycle and power drain.
 
 
Follow these steps if an H610S node in your storage cluster needs a complete power disconnect and reconnect. This procedure applies to NetApp HCI storage clusters as well as standalone Element storage clusters. The power reset process takes approximately 1 hour per H610S node to complete.
 
Before you begin:
  • Using the Element web UI, identify and record the node IDs of each H610S storage node.
  • If you are performing the upgrade and shutdowns remotely, ensure that you have an assistant in the data center that can unplug each H610S node, or that you can remotely remove power from the nodes.
  • Suppress the cluster in ActiveIQ to avoid creating AutoSupport cases for each 'nodeOffline' event.

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.