Skip to main content
NetApp Knowledge Base

Upgrade of NXOS 3232C firmware and RCF Causes Cluster Communication Loss

  1. Last updated
  2. Save as PDF
Views:
342
Visibility:
Public
Votes:
1
Category:
fabric-interconnect-and-management-switches
Specialty:
nas
Last Updated:

Applies to

Cisco NXOS 3232C Cluster Switches

Issue

  • After an upgrade and applying a new RCF to one of the cluster switches there is loss of communication between the cluster switches
    • SwitchIfIslDownWarn_Alert[ClusterSwitch2/Ethernet1/31]) ALERT
    • HA Group Notification (Health Monitor process cshm: SwitchIfIslDownWarn_Alert[ClusterSwitch2[/Ethernet1/31]) ALERT
  • Attempting advanced command cluster ping-cluster will report all paths up but basic connectivity failed on some paths, similar to:

Basic connectivity
succeeds on 2 path(s)
Basic connectivity fails on 2 path(s)

RPC status:
2 paths up, 0 paths down (tcp check)
2 paths up, 0 paths down (udp check)

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.