Skip to main content
NetApp Knowledge Base

Dell Emulex adapter PLOGI as G-Port

  1. Last updated
  2. Save as PDF
Views:
153
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

Applies to

  • Brocade 300 FC switch
  • Dell branded Emulex FC adapter

Issue

  • Following an abrupt site power outage Dell Servers do not see SAN boot LUN's using the iDrac - Emulex Adapter BIOS configuration screen.
  • ESXi host may show No boot device available or Operating System detected. Please ensure a compatible boot media is available.
  • Port Configuration Page SAN Discovery Target List for LPe35002-M2-D Port Name: 100000109BB8797E may show The Link is Up. No Targets Found.
  • Storage command ::> igroup show -instance shows the ESXi host Initiators are not logged in to storage.
  • Brocade #switchshow shows the port as a G-Port.
 
Index Port Address Media Speed State     Proto
==============================================
   0   0   0a0000   id     N8   Online      FC  F-Port  1 N Port + 1 NPIV public   <<<<< NetApp storage
   1   1   0a0100   id     N8   Online      FC  F-Port  1 N Port + 1 NPIV public
   2   2   0a0200   id     N8   Online      FC  G-Port
   3   3   0a0300   id     N8   Online      FC  G-Port  <<<<< ESXi hosts

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.