Skip to main content
NetApp Knowledge Base

fcp ping fails with the ping status not-reachable

Views:
297
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

Applies to

  • ONTAP
  • FCP
  • Cisco Native FNIC (nfnic) driver 4.0.0.65-1OEM.670.0.0.8169922 and 5.0.0.12-1OEM.700.1.0.15843807

Issue

  • vserver fcp ping-initiator show shows ping status: not-reachable
 
::> vserver fcp ping-initiator show -vserver NetApp -wwpn 20:00:00:25:xx:xx:xx:xx
                            Node       Logical   Ping        Extended
Vserver   WWPN              Name       Interface Status      Status
--------- ----------------- ---------- --------- ----------- -----------------
NetApp
          20:00:00:25:xx:xx:xx:xx AFFA1-01 lif-AFFA1-01 not-reachable -
          20:00:00:25:xx:xx:xx:xx AFFA1-01 lif-AFFA1-02 not-reachable -
          20:00:00:25:xx:xx:xx:xx AFFA1-02 lif-AFFA1-03 not-reachable -
 

::> vserver fcp ping-initiator show -vserver NetApp -lif lif-AFFA1-01 -wwpn 20:00:00:25:xx:xx:xx:xx

        Vserver: NetApp
    Remote WWPN: 20:00:00:25:xx:xx:xx:xx
       LIF Name: lif-AFFA1-01
           Node: AFFA1-01 
    Ping Status: not-reachable
Extended Status: -

 

  • switch fcping does not show any problem:

switch# fcping pwwn 20:00:00:25:xx:xx:xx:xx vsan 500
28 bytes from 20:00:00:25:xx:xx:xx:xx time = 297 usec
28 bytes from 20:00:00:25:xx:xx:xx:xx time = 207 usec
28 bytes from 20:00:00:25:xx:xx:xx:xx time = 261 usec
28 bytes from 20:00:00:25:xx:xx:xx:xx time = 260 usec
28 bytes from 20:00:00:25:xx:xx:xx:xx time = 224 usec

5 frames sent, 5 frames received, 0 timeouts
Round-trip min/avg/max = 207/249/297 usec

 

  • EMS shows payload mismatch:

1/6/2022 11:26:00 AFFA1-01 ERROR scsitarget.fct.pingErr: FC ping failed because of a mismatch between request and response payloads. The request payload is 0x81 and the response payload is 0x0 at index 248. The link rate of the port is 32.
1/6/2022 11:26:00 AFFA1-02 ERROR scsitarget.fct.pingErr: FC ping failed because of a mismatch between request and response payloads. The request payload is 0x81 and the response payload is 0x0 at index 248. The link rate of the port is 32.
1/6/20

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • Was this article helpful?