Skip to main content
NetApp Knowledge Base

Snapshot restore fails by "Cannot determine the status of the Snapshot restore"

Views:
185
Visibility:
Public
Votes:
2
Category:
snaprestore
Specialty:
dp
Last Updated:

Applies to

ONTAP 9

Issue

  • Snapshot restore fails by "Cannot determine the status of the Snapshot restore operation"

::> volume snapshot restore -vserver vs0 -volume vol3 -snapshot vol3_snap_archive

Error: command failed: Cannot determine the status of the Snapshot restore
       operation for "vol3_snap_archive" on volume "vol3" on Vserver
       "vs0". Verify that the Snapshot copy was restored. If necessary,
       try the operation again.

  • /etc/log/mroot/mlog shows d-snapshot-restore-volume is timed out

[kern_mgwd:info:2238] dsmdb_get_imp_1() on ksmfRawZapi failed: <IP>{ffffffff|ffffffff} prog=536873508 server=kernel: RPC: Timed out; netid=tcp fd=751 TO=200.0s TT=200.005s O=2084b I=0b CN=142012281/639 VSID=-3 <IP>:<PORT> <-> <IP>:<PORT>
[kern_mgwd:info:2238] ZSM: KSMF REQ FAILED: d-snapshot-restore-volume - Timeout: Operation "ksmfRawZapi_iterator::get_imp()" took longer than 200 seconds to complete [from mgwd on node "<NODE>" (VSID: -1) to kernel at <IP>] [TO=200s TRT=200.007s =><IP>:<PORT>1 CN=1650033125/1] {ksmf_invoke:360}
[kern_mgwd:info:2238] 0x821a1a100: 8003e900415666ab: WARNING: VOPL::DbladeZapiServerConnection:  promoteSnapshot 7050 ZSM - failed, status code = 571, extra = Timeout: Operation "ksmfRawZapi_iterator::get_imp()" took longer than 200 seconds to complete [from mgwd on node "<NODE>" (VSID: -1) to kernel at <IP>:<PORT>], took 200.007s, max 200s [<IP>:<PORT>]
[kern_mgwd:info:2238] 0x821a1a100: 8003e900415666ab: ERR: VOPL::VolumeObject:   (jobId:0 () : waitOnRetry aborted because retry counts configured to 0)
[kern_mgwd:info:2238] 0x821a1a100: 8003e900415666ab: ERR: VOPL::VolumeObject: Volume::promoteSnapshot: Failed to promote snapshot snapId(51) for jobId(00000000-0000-0000-0000-000000000000), vserverId(0x0000015a), clusterId(00000000-0000-0000-0000-000000000000), aggrId(00000000-0000-0000-0000-000000000000), volName(<VOLUME>), msid(0x0x00000000803d5f4f), dsid(0x0x000000000000198b), designed VolAccess Type (0) restore To Physical (0),isFGConstituent (0),err(code=13057,module=19,msg=ZSM - failed, status code = 571, extra = Timeout: Operation "ksmfRawZapi_iterator::get_imp()" took longer than 200 seconds to complete [from mgwd on node "<NODE>" (VSID: -1) to kernel at <IP>], took 200.007s, max 200s [<IP>:<PORT>]), reason(ZSM - failed, status code = 571, extra = Timeout: Operation "ksmfRawZapi_iterator::get_imp()" took longer than 200 seconds to complete [from mgwd on node "<NODE>" (VSID: -1) to kernel at <IP>], took 200.007s, max 200s [<IP>:<PORT>]).

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.