Skip to main content
NetApp Knowledge Base

What is the meaning or function of newly added options on ONTAP 9.12?

  1. Last updated
  2. Save as PDF
Views:
56
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
CORE
Last Updated:

Applies to

ONTAP 9.12

Answer

  1. raid.h.mute.timeout Mute the periodic shutdown(halt) but retain the warning message.

NOTE:

  • With the ONTAP 9.12.1 code change via Bug ID 944990 - System no longer halts if a RAID aggregate remains degraded for 24 hours, the default system behavior is changed not to halt if an aggregate is completely degraded.
  • If you wish to preserve the previous behavior, it is required to set raid.timeout option to a nonzero value deliberately for the system to shut down on the expiry of the timeout period.
    • Along with the option value of raid.timeout modification, the default option value of raid.h.mute.timeout will be changed from 0 to 1 
    • raid.h.mute.timeout is a hidden option that usually can only  be viewed by run -node <node name> -command "priv set diag;rdfile /etc/registry" command.
  1. sfu.psm.quiet.period Adjust the quiet time when the IOM firmware of the disk shelf is updated. Refer to BUG 1409547 for the used sample.
  2. sis.ads_optimal_clog_size_in_mb Modify change log threshold value in MBs.
  3. sis.auto_block_share_workers Options for interworking with the ADS function. NOTE: ADS -Automatic Dedupe Scheduling. - Volumes are configured with auto policy by default and the system automatically schedules these volumes for background dedupe processing.
  4. sis.cvbd_share_refcounted_recpt_vvbns Option about Cross Volume background Dedupe (Allow cross vol sharing on vvbn refcounted recipients for cross volume)
  5. sis.dense_data_limit Limit the clone operation.
  6. sis.override_default_cmpr_algo_with_lzopro Controlled by the command below. DO NOT use options to configure the value.

::> set d
::*> volume efficiency modify ?
　　......
  [ -compression-algorithm {lzopro|gzip|lzrw1a|zstd} ]  *Compression Algorithm
　　......

  1. sis.savings_percent_to_deprioritize
  • Change the prioritization of the system.
  • If this option is set to 0, the volume will not get deprioritized due to savings issue: ::> run -node * -c options sis.savings_percent_to_deprioritize 0 
  • Reference KB: Storage efficiency deprioritized on a volume
  1. wafl.sis_clone.max_unsplit_blks
  • Adjust clone backpressure limit by 4KB-unit
  • Controlled by advanced privilege level command volume file clone split load modify -max-split-load
  • Reference document volume file clone split load modify

Additional Information

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.