Skip to main content
NetApp Knowledge Base

How does ONTAP trigger Spares Low Check?

Views:
1,413
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

Applies to

ONTAP

Answer

Spares low checking is triggered under the following conditions:

  • At boot and takeover time.
  • By hourly check of spares by global status monitor.
  • When the M-host or a management applications invokes the aggr-check-spares-low Zapi.
  • When configuration change may result in new demand for spares, such as when an aggregate or plex is onlined.
  • Anytime the population of a spare pool changes.

There are two cases for change to population of a spare pool, addition and subtraction.

  • Addition: This includes the following cases:
    • Spare disks are added and/or assigned to a system. This includes case where disk is dynamically qualified, or finally completes initialization after initial failure.
    • An aggregate or plex is offlined and destroyed and its disks released to the spare pool.
    • Aggregate orphan disks are released to the spare pool.
    • A disk in broken pool is unfailed.
    • A disk is released from disk maintenance center with no trouble found.
    • Demotion of aggregate or RAID group type from RAID-DP to RAID4.
  • Subtraction: This includes the following cases:
    • Aggregate or plex creation.
    • Promotion of unmirrored to mirrored aggregate.
    • Addition of disks to an existing aggregate.
    • Promotion of aggregate or RAID group type from RAID4 to RAID-DP.
    • Allocation of replacement disk for reconstruction, disk copy operation for sick disk, disk replacement, or multi-disk carrier evacuation.
    • A spare disk is removed or failed.
    • A spare disk gets placed into disk maintenance center. This includes for maintenance testing, disk sanitization and disk recovery.

Additional Information

BUG 1209463 - Storage "spares low" condition reported infrequently 

With this change, "spares low" conditions are reported weekly, at minimum.

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?