Skip to main content
NetApp Knowledge Base

Shelves and Bay show as ? on a MetroCluster with a switchname containing a "."

  1. Last updated
  2. Save as PDF
Views:
274
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

​ ​

Applies to

  • MetroCluster FC
  • Fabric Attached
  • Switchname contains a "." in the name

Issue

Shelves and Bay show as ? on a MetroCluster with a switchname containing a "."

sysconfig -r shows shelf and bay as "?"

  Plex /aggr0/plex24 (online, normal, active, pool0)
    RAID group /aggr0/plex24/rg0 (normal, block checksums)

      RAID Disk Device                          HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------                          ------------- ---- ---- ---- ----- --------------    --------------
      parity    switch1_siteA.test:8.126L2      0e    ?   ?   FC:A   0   SAS 10000 857000/1755136000 858483/1758174768
      data      switch1_siteA.test:8.126L3      0f    ?   ?   FC:A   0   SAS 10000 857000/1755136000 858483/1758174768

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.