Skip to main content
NetApp Knowledge Base

PCI_NMI panic due to FCVI card failure

  1. Last updated
  2. Save as PDF
Views:
68
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
MetroCluster
Last Updated:

Applies to

  • Fabric MetroCluster
  • ONTAP 9
  • FAS8020
  • X1132A FCVI card

Issue

One or more nodes panic. Panic cause can be seen in the SP system log output:

Example:

SP-login: login: 
0x01ccec02c0d54960: Add bad root port 0/3/0 (1)
0x01ccec02c1eeae44: 0/3/0 status 0 sstatus 0x2000
0x01ccec02c1eeb4fc: Recovery process terminated
PANIC  : PCI Error NMI from device(s):Qlogic FC 8G adapter in slot 1 on Controller, Qlogic FC 8G adapter in slot 1 on 
Controller.
version: 9.7P19: Mon May 23 17:03:14 EDT 2022
conf   : x86_64.optimize
cpuid = 4
Uptime: 15d12h34m10s

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.