Skip to main content
NetApp Knowledge Base

PANIC: rlib_port_ipspace_assign: port could not be moved to HA ipspace

Last Updated:

Applies to

  • AFF-A400
  • ONTAP 9
  • MetroCluster IP
  • New install


When trying to assign one of the expansion slot ports to the HA IPSpace (for MetroCluster IP), the node panics, displaying a string similar to the below.
e1a: non-sleepable synch operation failed: 16.  if_flags 0x00008803, if_drv_flags 0x00000040
c4iw_register_device c4iw_dev 0xfffff8023f292000, adapter 0xfffff800210f7000c4iw_register_device c4iw_dev 0xfffff8023f292000, adapter 0xfffff800210f7000 ret=0rlib_rport_alloc: enabling unsafe global rkey
rlib_rport_alloc: enabling unsafe global rkey
PANIC  : rlib_port_ipspace_assign: port e1a could not be moved to HA ipspace [err=92]


Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device