Skip to main content

This Site will be down for up to 3 hours on December 2, 2023 from 8 PM - 11 PM PST, to deploy an infrastructure update.

NetApp Knowledge Base

MetroCluster IP connection connect did not receive ping response

Last Updated:

Applies to

  • MetroCluster IP
  • ONTAP 9
  • Dark fibre ISLs


metrocluster configuration-settings connection connect fails with error:

cluster01::*> metrocluster configuration-settings connection connect Warning: This operation configures the connections between partner nodes using the interfaces configured for the nodes in a MetroCluster over IP configuration. These interfaces cannot be changed after using the "metrocluster configure" command. Do you want to continue? {y|n}:y

[Job 76] Checking the network endpoints from the local cluster.

[Job 76] Job failed: Did not receive a "ping" response using the network addresses "" and "" on node "cluster01-01" in cluster "cluster01".

Use the "metrocluster operation show" command to view detailed error information. Resolve the errors, then try the command again.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device