Unable to create SnapMirror relationship via BlueXP or System Manager with Volume Encryption

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

Views:: 961

Visibility:: Public

Votes:: 0

Category:: snapmirror

Specialty:: dp

Last Updated:

Applies to

System Manager (formerly known as OnCommand System Manager)
BlueXP
ONTAP 9.3 and later

Issue

1. When Volume Encryption is enabled on the source cluster, but not on the destination cluster, creating a SnapMirror relationship through ONTAP System Manager will fail with the following error:

Volume Encryption is not supported on the destination cluster

2. Below error is encountered on BlueXP:

Error:The existing SVM peer relationship between the source SVM src_svm on src_cluster and the destination SVM dest_svm on dest_cluster is not valid. Use System Manager or the clustered Data ONTAP CLI to fix the SVM peer relationship and then try again.

If you then try to create the relationship via System Manager, the "Encryption is not enabled on the destination cluster." error is received.

3. MGWD.log:

Tue Oct 11 2022 15:27:02 +08:00 [kern_mgwd:info:2739] 0x831262600: 8603e8000001ec87: ERR: tables::snapmirror_utils: [volPlaceAndCreateUsingBalancedPlacement:19989] Failed to create vol SVM:volume_test_dest on aggr aggr1: Error: Package "VE" is not licensed in the cluster.