Skip to main content
NetApp Knowledge Base

Will a zoning change affect I/O on fibre channel switches?

  1. Last updated
  2. Save as PDF
Views:
238
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
san
Last Updated:

Applies to

All versions of OnTap

Answer

Most enterprise switches have a two step process for zoning changes - making the changes and enabling the changes.  Enabling the changes can cause disruption. 

Enabling changes to the zoning database causes the switch to rebuild the zone-table for each port/WWN in zones that were changed. The switch will then send an RSCN to all devices affected by those changes.  Devices in zones that were not changed will not be affected.  Depending on how the host HBA reacts to this RSCN will determine if a host is affected or not. 

Additional Information

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.