Skip to main content
NetApp Knowledge Base

High latency is seen during SVM DR initialization

Views:
208
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
perf
Last Updated:

Applies to

  • ONTAP 9
  • SVM DR
  • Performance

Issue

  • SVM DR snapmirror initialization is started
  • Some time later it is noted that VMs are not responding and high latency is seen on ESXi servers
  • QOS statistics indicate that most of the latency is due to disk

cluster::> qos statistics volume latency show -vserver svm_lv_esx -volume LV_ESX_01
Workload            ID    Latency    Network    Cluster       Data       Disk    QoS Max    QoS Min      NVRAM      Cloud  FlexCache    SM Sync         VA
--------------- ------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
-total-              -    23.71ms    81.00us    44.00us     5.56ms    18.01ms        0ms        0ms    12.00us        0ms        0ms        0ms        0ms
LV_ESX_01-wid..  57540   100.60ms    65.00us        0ms   208.00us   100.33ms        0ms        0ms     2.00us        0ms        0ms        0ms        0ms
-total-              -    18.64ms    81.00us    56.00us     4.75ms    13.74ms        0ms        0ms    15.00us        0ms        0ms        0ms        0ms
LV_ESX_01-wid..  57540    73.35ms   207.00us        0ms   114.00us    73.02ms        0ms        0ms    14.00us        0ms        0ms        0ms        0ms

  • Disk statistics are reviewed to find that all disks are 100% utilized with mostly reads

cluster::> system node run -node <node>

node> statit -b

(wait a 30 seconds)

node> statit -e

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.