Skip to main content
NetApp Knowledge Base

Required mirrored non-root aggregates were not found in cluster CLUSTER1

Views:
188
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • MetroCluster 2 node to 4 node expansion
  • MetroCluster 4 node to 8 node expansion
  • ONTAP 9

Issue

  • When expanding a fabric MetroCluster from 2 Nodes to 4 nodes or 4 nodes to 8 nodes ,you run the configure refresh command ::> metrocluster configure -refresh true as documented in the expansion guide.
  • Job fails with error.

CLUSTER1::*> metrocluster operation show
       Operation: configure
           State: failed
      Start Time: 6/12/2021 21:40:55
        End Time: 6/12/2021 21:40:56
          Errors: Required mirrored non-root aggregates were not found in cluster "CLUSTER1". MetroCluster configuration requires at least 2 mirrored non-root aggregates that are home, with at least 20GB of free space, in "online" state before running the configure command.

  • When you try to create the mirrored aggregate it fails with error.

CLUSTER1::*> aggre create -aggregate aggr1 -disklist 3.30.6,3.30.7,3.30.8 -mirror-disklist 4.20.6,4.20.7,4.20.8 -node NODE1
  (storage aggregate create)

Error: command failed: Cannot create the aggregate because node "NODE1" is
       not fully configured for MetroCluster operations. MetroCluster
       configuration operations might be in progress. Wait a few minutes, then
       try the command again.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
  • Was this article helpful?