Skip to main content
NetApp Knowledge Base

ATTO 7500N reboot with error "ECC Single-bit error detected"

Views:
87
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

Applies to

  • Fabric MetroCluster
  • ATTO 7500N Fibrebridge

Issue

  • Bridge Unexpected Reboot
  • The following is reported in the bridge event log
CRIT ECC Single-bit error detected. D:2 S:00000201 A:00dd9fd7
INFO Exception occurred. Possible redundant preceding log entries
CRIT Software Interrupt Exception Detected (SWI) (001P)
CRIT Instr Address    = 001d99c4
CRIT SWI Number       = 0x000081
INFO Software Interrupt
INFO 01/08/2023 08:07:37
INFO ST[006b9600-006c1600] | FP[006c14e4] CPSR[60000193]
INFO 0014bac4<-002651f0 | SP[006c14e8] FP[006c1554]
INFO 002650c4<-00000584 | SP[006c1558] FP[006c5490]
INFO FP out of range [6c1554]
INFO Trying FP = 6c15a4 [6c15fc]
INFO 001d9954<-00191fdc | SP[006c15a8] FP[006c15fc]
INFO 00191b98<-00191b94 | SP[006c1600] FP[00000000]
INFO Exception occurred. Possible redundant preceding log entries
INFO Reset.  HW Code: Software Warm
INFO Reset.  Reason: Critical Hardware Error Detected

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.